Products
- Micropipette puller
- Iontophoresis pumps
- Extracellular amplifiers
- Carbon fiber electrodes
- Accessories
- Download manuals
I. Electrophysiological instruments
|
• Gravipull-2 micropipette and electrode
puller |
||
 This
puller is specifically designed to pull multi- or singlebarrel pipettes
for microiontophoresis and extracellular recording. The pulling force
is generated by gravity using an 8-stage weight system. The sliding
(lower) shaft travels up to 4" (100 mm) in vertical length providing
a means to pull long-tapered multibarrel pipettes. It can be operated
from either 115 VAC or 230 VAC with frequency ranging from 47 Hz to
60 Hz. The heating current is continuously regulated between 1 and 18
A at 12 VDC. Convenient halogen work light.• Details • Manual.PDF • Price & Ordering |
|
|
| • ExAmp-20KD
extracellular amplifier Catalog #: M2300 |
• Union-40 nanoampere iontophoresis
pump Catalog #: M1140 |
|
 Dual-channel
version of the ExAmp-20KB powered by external power supply instead of
batteries. Complete with headstage probe, manual and output cables.
Requires external power supply; see Cat#: M1116.
Available accessories include small diameter BNC cables
and DC power cord. • Details • Manual.PDF • Price & Ordering |
 Precision
constant current source forintracellular deposition of tracers or for extracellular ejection of neuroactive substances. Two switch-selectable current ranges: 0-20 nA or 0-200 nA with an accuracy of 0.1 nA; max. compliance voltage: ±40V. Shipped complete with cable and manual. Requires external power supply; see Cat#: M1116. Available accessories include small diameter BNC cables and DC power cord. • Details • Manual.PDF • Price & Ordering | |
|
• Replacement cable for BAB-501 iontophoresis
pump
Catalog #: M1051 |
• Replacement cable for
Union-40 Catalog #: M1101 |
|
| • ExAmp-20KB
extracellular amplifier Catalog #: M2100 |
• ExAmp-20K
extracellular amplifier Catalog #: M2200 |
|
 Operating
on 4 standard D size batteries, this model satisfies even the finest
research needs. The included headstage probe is an electrode holder
in one. Built-in filters include a 60/50 Hz reject filter and are optimized
for low-noise recording with carbon fiber or metal electrodes. Audible
low battery test. Complete with manual and batteries. Available accessories
include small diameter BNC cables.
• Details • Manual.PDF • Price & Ordering |
 The
unique headstage probe design provides direct electrode access that
can be activated either manually or by external switching signal. Built-in
filters include a 50/60 Hz reject filter and are optimized for low-noise
recording with carbon fiber or metal electrodes. Requires external power
supply; see Cat#: M1116 . Available accessories
include small diameter BNC cables and DC
power cord. • Details • Manual.PDF • Price & Ordering |
|
| • Replacement headstage
probe for ExAmp-20KB Catalog #: M2110 |
• Replacement headstage
probe for ExAmp-20K Catalog #: M2210 |
|
| • International
external power supply With options of US, Euro, UK or AUS plugs Catalog #: M1116 |
• Replacement
headstage probe for ExAmp-20KD Catalog #: M2310 |
|
|
A TIP you can use:
If you have or plan to purchase more than one externally powered
units from Kation Scientific consider the configuration as shown at
left. The recommended power supply (Cat.# M1116) can provide power
for up to 8 of our instruments. |
|
A
reliable constant current source for
II. Carbostar series carbon fiber electrodes
• Carbostar-1 recording electrode |
• Carbostar-3 recording/iontophoresis
electrode |
|
  Single barrel carbon fiber electrodes for extracellular
recording and/or in vivo voltammetry. |
|
Three barrel Carbostar-3 carbon fiber combination electrodes are
sold in protective plastic boxes. Each box contains three electrodes.
Recommended when recording site only is to be marked with iontophoresed
tracer material or when one or two substances are to be tested on
neuronal firing. |
| • Carbostar-4 recording/iontophoresis
electrode Catalog #: E1041 |
• Carbostar-6 recording/iontophoresis
electrode Catalog #: E1061 |
|
Three barrel Carbostar-3 carbon fiber combination electrodes are
sold in protective plastic boxes. Each box contains three electrodes.
Recommended when recording site only is to be marked with iontophoresed
tracer material or when one or two substances are to be tested on
neuronal firing. |
The six barrel Carbostar-6 carbon
fiber combination electrodes are for extracellular recording and microiontophoresis.
Recommended when up to five substances are to be tested on neuronal
firing.
Price information Related items: |
|
| • Carbostar-7S recording/iontophoresis
electrode Catalog #: E1073 |
 Carbostar-7S
electrodes are recommended when slightly bigger ejection orifices are
needed. To achieve this, the carbon fiber is placed in a peripheral
glass capillary tubing. Carbostar-7Ss are sold in protective plastic
boxes. Each box contains three electrodes.
|
|
•
BNC to BNC cable, RG-174U |
||
|
Length |
This DC power cable assembly features two 2.1 mm plugs connected
by a parallel type cord with a striped pin indicator. Designed for
providing power for multiple Kation made instruments connected in
a daisy chain configuration. |
Reduce your jungle of
cables by using small (0.1") diameter coaxial cables. These RG-174U
cables are more flexible than those with greater diameters, allowing
better visibility and handling abilities. Designed for use wherever
BNC connections are employed. • Price & Ordering |
||
• BAB-500
Iontophoresis Pump (Discontinued)
• BAB-501
Iontophoresis Pump
• ExAmp-20KB
Extracellular Amplifier
• ExAmp-20K
Extracellular Amplifier
• ExAmp-20KD
Dual-Channel Extracellular Amplifier
• Gravipull-2
micropipette and electrode puller
• Union-36
nanoampere iontophoresis pump (Discontinued)
• Union-40
nanoampere iontophoresis pump
• Using
Carbostar Carbon Fiber Electrodes