|
• Gravipull-2 micropipette and electrode
puller
Catalog #: P3020
|
• BAB-501 microampere iontophoresis
pump
Catalog #: M1150
|
 This
puller is specifically designed to pull multi- or singlebarrel pipettes
for microiontophoresis and extracellular recording. The pulling force
is generated by gravity using an 8-stage weight system. The sliding
(lower) shaft travels up to 4" (100 mm) in vertical length providing
a means to pull long-tapered multibarrel pipettes. It can be operated
from either 115 VAC or 230 VAC with frequency ranging from 47 Hz to
60 Hz. The heating current is continuously regulated between 1 and 18
A at 12 VDC. Convenient halogen work light.
• Details •
Manual.PDF • Price
& Ordering |
 A
reliable constant current source for
iontophoretic deposition of dyes or track tracer materials. Excellent
for marking recording sites. Current range: ±0-20 µA;
maximum compliance voltage: either ±200 V or ±500 V.
Requires an external power supply; see Cat# M1116.
Complete with cable and manual. Available accessories include small
diameter BNC cables and a power
cord.
• Details • Manual.PDF
• Price & Ordering
|
• ExAmp-20KD
extracellular amplifier
Catalog #: M2300 |
• Union-40 nanoampere iontophoresis
pump
Catalog #: M1140 |
|
|
 Precision
constant current source for
intracellular deposition of tracers or for extracellular ejection of
neuroactive substances. Two switch-selectable current ranges: 0-20 nA or 0-200
nA with an accuracy of 0.1 nA; max. compliance voltage: ±40V. Shipped complete with cable
and manual. Requires external power supply; see Cat#: M1116.
Available accessories include small diameter BNC cables
and DC power cord.
• Details • Manual.PDF
• Price & Ordering
|
|
|
• Replacement cable for BAB-501 iontophoresis
pump
Catalog #: M1051
|
• Replacement cable for
Union-40
Catalog #: M1101 |
• ExAmp-20KB
extracellular amplifier
Catalog #: M2100 |
• ExAmp-20K
extracellular amplifier
Catalog #: M2200 |
 Operating
on 4 standard D size batteries, this model satisfies even the
finest research needs. The included headstage probe is an electrode
holder in one. Built-in filters include a 60/50 Hz reject filter
and are optimized for low-noise recording with carbon fiber or
metal electrodes. Audible low battery test. Complete with manual
and batteries. Available accessories include small diameter BNC
cables.
• Details • Manual.PDF
• Price & Ordering |
 The
unique headstage probe design provides direct electrode access
that can be activated either manually or by external switching
signal. Built-in filters include a 50/60 Hz reject filter and
are optimized for low-noise recording with carbon fiber or metal
electrodes. Requires external power supply; see Cat#: M1116
. Available accessories include small diameter
BNC cables and DC power cord.
• Details • Manual.PDF
• Price & Ordering
|
• Replacement headstage
probe for ExAmp-20KB
Catalog #: M2110 |
• Replacement headstage
probe for ExAmp-20K
Catalog #: M2210 |
• International
external power supply
With options of US, Euro, UK or AUS plugs
Catalog #: M1116 |
• Replacement
headstage probe for ExAmp-20KD
Catalog #: M2310 |
A TIP you can use:
 Daisy
chaining multiple units saves money and space
If you have or plan to purchase more than one externally powered
units from Kation Scientific consider the configuration as shown at
left. The recommended power supply (Cat.# M1116) can provide power
for up to 8 of our instruments.
(Click on the picture to enlarge)
|
|
•
TMP-5a temperature controller
Catalog #: H4100 / H4101 |
|
|
The TMP-5a temperature controller
is designed to prevent small or medium sized experimental animals from cooling off
while kept in a stereotaxic frame. The main unit controls the temperature of a
heating plate placed under the experimental animal.
Heating plates fit in all stereotaxic frames. Small, medium or large sizes are
recommended for mice, rats or cats (or similarly sized animals), respectively.
• Details • Manual.PDF
• Price & Ordering
|
• Carbostar-1 recording electrode
Catalog #: E1011 |
• Carbostar-3 recording/iontophoresis
electrode
Catalog #: E1031 |
|
Single barrel carbon fiber electrodes for extracellular
recording and/or in vivo voltammetry.
Sold in multiples of seven in plastic boxes.
• More •
Price & Ordering |
Three barrel Carbostar-3 carbon fiber combination electrodes are
sold in protective plastic boxes. Each box contains three electrodes.
Recommended when recording site only is to be marked with iontophoresed
tracer material or when one or two substances are to be tested on
neuronal firing.
• More •
Price & Ordering
|
• Carbostar-4 recording/iontophoresis
electrode
Catalog #: E1041 |
• Carbostar-6 recording/iontophoresis
electrode
Catalog #: E1061 |
Three barrel Carbostar-3 carbon fiber combination electrodes are
sold in protective plastic boxes. Each box contains three electrodes.
Recommended when recording site only is to be marked with iontophoresed
tracer material or when one or two substances are to be tested on
neuronal firing.
• More •
Price & Ordering
|
The six barrel Carbostar-6 carbon
fiber combination electrodes are for extracellular recording and microiontophoresis.
Recommended when up to five substances are to be tested on neuronal
firing.
Price information
Related items:
ExAmp-20KB extracellular
amplifier
Union-40 nanoampere iontophoresis
pump
BAB-501 microampere iontophoresis
pump
• More •
Price & Ordering
|
•
Carbostar-7S recording/iontophoresis electrode
Catalog #: E1073 |
 Carbostar-7S
electrodes are recommended when slightly bigger ejection orifices
are needed. To achieve this, the carbon fiber is placed in a peripheral
glass capillary tubing. Carbostar-7Ss are sold in protective plastic
boxes. Each box contains three electrodes.
• More •
Price & Ordering
|
•
BNC to BNC cable, RG-174U
Catalog #: T20-X, For complete number, substitute "X" with
length choice |
• DC power
cable
Catalog #: T3006 |
|
Length
6" (15 cm)
12" (30 cm)
24" (61 cm)
36" (91 cm) |
This DC power cable assembly features two 2.1 mm plugs connected
by a parallel type cord with a striped pin indicator. Designed for
providing power for multiple Kation made instruments connected in
a daisy chain configuration.
• Price & Ordering
|
Reduce your jungle of
cables by using small (0.1") diameter coaxial cables. These RG-174U
cables are more flexible than those with greater diameters, allowing
better visibility and handling abilities. Designed for use wherever
BNC connections are employed.
• Price & Ordering |
